Building bargain brake ducts from Porsche GT3 part...

5 Views

Now that’s actually cool!!!! such as you stated I’d perhaps take into account augmenting the attachment with some zip-ties however that may be a nice tip!!! Surprise if I could make them work on a 951.

Simply ordered up a set for my AE86. For $12 laborious to go incorrect. (Plus I can say I’ve fancy Porsche elements on my automotive)

After somewhat extra analysis I discovered that these are an improve for my 987.1 Cayman and could be modified for the Cayman rear brakes. $34 shipped.

You might be all such enablers…

dps214

HalfDork

4/16/21 7:15 p.m.

I keep in mind having to purchase a non-gt3 one for my boxster to switch a mangled one and it was dearer than a pair of gt3 ducts.

dps214 stated:

I keep in mind having to purchase a non-gt3 one for my boxster to switch a mangled one and it was dearer than a pair of gt3 ducts.

Type of associated, however once I needed to substitute a tie rod finish on my 911, the Turbo piece price a tick much less–and that is the one that gives tighter dealing with. In order that’s once I did the improve.

Sure! I’ve a pair of those on my MkV GTI from once I was monitoring it, pre-mustang. They clip proper onto the management arms for a FSI engined automotive. Not the TSI, although, for the reason that management arms have a wider cross-section. They hung down a good bit into the airstream and made a noticeable distinction in brake fade at Roebling Highway.

I don’t have a use for these but as I’m again into autoX, however I’ll order a set simply to have JIC for that value

Dang you…extra money spent!

Mine will arrive subsequent week, loads of time to placed on for my VIR monitor day!

Cool tip, one Ive not heard about, have to be unfold on the fb boards or one thing

I am going to submit a hyperlink on the OC

And in true Pcar trend, these will go NLA and turn into value 3,245 bucks a bit 4 years from now. Purchase 100 and pay to your child’s school (or tech faculty).